Voltage: 240V / 50Hz
Maximum Current: 10 Amp
Starting Pressure: 1.5-3 bar adjustable
Maximum working Pressure: 10 Bar
Intel/oulet male: 1" / 25mm
Protection Rating: IP 65
Maximum Temperature Rating: 60°C
Manual Start Switch: RESET
Tension LED: POWER
Pump Working LED: ON
Security System LED: FAILURE
Special Non Return Valve to avoid surges
Start and stop the pump automatically
Protect the pump from damage caused by dry running
Built in Australia standard 3 pin female socket and 1.5m cable with 3 pin male power plug.
The pressure control is an excellent option for all household pressure systems. It allows the pump to run at a constant flow. The controller stops rapid cycling of your pump unit, eliminating water fluctuating through your home.
The Electronic Controller orders the automatic start and stop of the water pump when opening or closing any tap or valve of the system. The controller can keep constant pressure and water flow in the system as long as any tap in the system is open during the pumps operation.
WARNING: These units all contain circuit boards and areas with fluctuating power supply or use with generator power is not recommended as it will burn out the circuit board.
3 Reviews Hide Reviews Show Reviews
This flow control switch is a great product that so far has performed very well. Great for most home pressure systems.
At about 20% the price of other units I've priced this unit works to my expectations and think it is exceptional value
This TUHORSE product was nearly half the price of other suppliers, prompt service, quick freight, and installed and worked perfectly. Highly recommend to other purchasers. Supplier quick to answer phone for initial product inquiry.