Solar Pump Package include;
3" 500W/48V stainless steel solar pump with 40M power cable
Auto control box
One spare helical screw rotor
2 x MC4 cable extension for solar panel connect to control box
1 x 40M & 1 x10M combined water sensor ( one for bore and other for tank)
User manual
24 months back to base warranty
Free delivery in Australia
Pump Specifications:
Pump power: 500W/48V-DC
Pump type: Screw rotor
Max flow: 30L/min or 1800L/h
Max heads: 100M
Outlet: 3/4"
Weight: 10kg
Dimension: 76mm x 450mm
Maximum submerge depth: <30m
Auto control box specifications;
Water level control of tank and bore by sensors
Motor speed adjustable
Low power protection
Solar and/or batteries power input option
MPPT Maximum Power Point Tracking system
Allow input power voltage up to 100V/DC (solar panel open circuit)
This pump is suitable for 3" or large bore. It also used for pumping water from rivers, dams, creeks and springs and to transfer water from one site to another.
It is easy to install and cost nothing to run after installation.
This helical rotor pumps do not require expensive inverters and batteries to operate, however the controller will allow the use of storage batteries if required
Recommended to use either 2 or 4 solar panels.
19 Reviews Hide Reviews Show Reviews
-
1200gpd at 80m of head
We installed this pump last year in a bore with a standing water level of 80m. It is fitted with 760watts of panels and has been doing a great job since then. We haven't had to touch it. It is delivering about 1200 gpd to a tank about 70m away. Much cheaper to install and run than a generalor and submersible.
