This 2" solar pump special deigned for 3" bore case. If your bore case are 4" or bigger. We recommend you get 3" or 4" bore pumps which the screw rotor are more strong and last longer.
Solar pump package include;
2" 370w/36V stainless steel solar pump with 3M power cable
Auto control box
One spare helical screw rotor
2 x MC4 extension cable for solar panels connect to control box
1 x 40M&10M combined water sensor ( for bore and water tank)
User manual
24 months (Pump&Control Box) back to base (Sydney) warranty.
Free delivery in Australia
You have to get: ( package do not include)
1, A stainless steel wire( called safety cable) to hold pump in bore. If pump water from dam or river. A float set up has required
2, Panels frames to support solar panels.
3, Poly pipe from pump to water tank.
4, Extra power cable and cable water proof join
This solar pump body diameter is 2"/50mm, it suitable for 3" bore hole slow water flow and lift water up to 80m. Daily water flow base on 6-8 hours peak sun per day in winter and 8-10 hours in summer. Below chat tested by 48V/DC. If pump work with 2 x 200w or 4 x 200w solar panels. the flow rate could less or more.
Heads L/min Gallon/h
80m 10L 133
60m 18L 240
40m 25L 330
10m 33L 440
Pump recommended run under 80m dynamic head.
Pump power: 370W/36V-DC
Pump type: Helical screw rotor
Maximum Head: 95m
maximum flow: 2000 litre per hour
Outlet: 0.5"
Weight: 10kg
Dimension: 58mm x 50mm
Maximum submerge depth: <30m
Auto control box specifications;
Water level control of tank and bore by sensors
Motor speed adjustable
Low power protection
Solar and/or batteries power input option
MPPT Maximum Power Point Tracking system, Allow input power voltage up to 100V/DC (solar panel open circuit maximum voltage)
This pump is suitable for 3" or large bore. It used for pumping water from rivers, dams, creeks and springs and transferring water from one site to another.
It is easy to install, all plug and go. cost nothing to run after installation.
This helical rotor pumps do not require expensive inverses and batteries to operate, however the controller will allow the use of storage batteries if required.
Option:
240V/AC to 48V/Dc Converter This converter allow solar pump run with generator.