4" 1000W/110V stainless steel solar pump with 40M power cable
Auto control box
One spare helical screw rotor
2 x MC4 cable extension for solar panel connect to control box
2 x 10M combined water sensors ( one for bore and other for tank)
24 months back to base warranty
Pump power: 1000W/110V-DC
Pump type: Helical screw rotor
Max flow: 45L/min or 2700L/h
Max heads: 140M
Dimension: 100mm x 700mm
Maximum submerge depth: <40m
Auto control box specifications:
Water level control of tank and bore by sensors
Motor speed adjustable
Low power protection
MPPT Maximum Power Point Tracking system
Allow input power voltage up to 200V/DC (solar panel open circuit)
This pump is suitable for 4" or large bore. It used for pumping water from rivers, dams, creeks and springs and to transfer water from one site to another.
It is easy to install and cost nothing to run after installation.
This helical rotor pumps do not require expensive inverters and batteries to operate, however the controller will allow the use of storage batteries if required.
Solar pump and auot control box manual