Solar Bore Pump package include;
4 x200W mono crystalline A grade solar panels.
4" 1000W/110V stainless steel Screw Solar Pump with extra 40M 4mm x3 wires fitted power cable
Auto control box
One spare helical screw rotor
2 x 2M with MC4 extension cable for connect solar panels to control box
1 x 40M & 1 x 10M water sensors ( for bore and water tank)
24 months (Pump&Control Box) back to base (Sydney) warranty
This solar pump package is suitable for bore deep from 10m-80m. ( more than 5 hours pumping per day).
Heads L/min Gallon per hours
80m 15L 200
70m 20L 267
60m 30L 400
50m 35L 467
40m 40L 533
20m 50L 667
10m 55L 733
Solar Pump Specifications:
Pump power: 1000W/110V-DC
Pump type: Helical screw rotor
Maxi head: 140M
Maxi flow: 45L/min (rated in 110V/DC)
Dimension: 100mm x 550mm
Maximum Submerge depth: < 30m
Auto control box specifications;
Water level control of tank and bore by sensors
Motor speed adjustable
Low power protection
MPPT Maximum Power Point Tracking systemAllow input power voltage up to 200V/DC (solar panel open circuit maximum voltage)
Extra power cable
This pump is suitable for 4" or large bore. It used for pumping water from rivers, dams, creeks and springs and to transfer water from one site to another.
Ti is easy to install, all plug and go. cost nothing to run after installation.
This helical rotor pumps do not require expensive inverters and batteries to operate, however the controller will allow the use of storage batteries if required.
Solar pump and auto control box manual
2 Reviews Hide Reviews Show Reviews
Happy with how pump working,no drama so far. Easy to install pump in bore.Pumps 5000 gallon tank in 2 days in winter time Fast delivery
The pump is working great it's pumping 60m of head and pumping 800m up the hill and getting about 30ltr a min