Solar pump package include;
4" DC/AC Motor with Stainless steel centrifugal Pump (either A12,A-16 or BF09,BF-11)
1 x Isolator switch box.
2 x 2M MC4 extension cable for connect solar panels to control box
1 x Splice kit for cable join.
User manual
24 months back to base (Sydney) warranty
Free delivery.
******Package do not include solar panels*****
Option:
Switch box extra $350. This switch box allow pump auto/manual switch to AC or DC. Also have options to cut pump power off by sensor or pressure switch when water tank was full.
We do have many model of pumps (wet end) to fit for these DC/AC motor depend on solar panels quantity and flow or head requirement..
Please pick up most suitable model when checkout. If you need us to help to select pump model. Please feel free to contact us.
Below are few examples:
Daily water flow calculated around 5-6 hours pumping in winter and 10 hours in summer.
Motor with A12 pump and if run with 8 x 275w solar panels :
Heads L/min GPH
100m 15L 200
90m 20L 266
80m 30L 400
60m 45L 600
40m 55L 733
20m 62L 826
Motor with BF09 Pump and if run with 8 x 275w solar panels:
Heads L/min GPH
80m 15L 200
70m 40L 533
60m 48L 640
40m 70L 933
20m 85L 1133
10m 92L 1226
Motor with BF11 Pump end and if run with 11x 275w solar panels:
Heads L/min GPH
80m 60L 800
70m 80L 1066
60m 100L 1333
50m 120L 1600
40m 135L 1800
30m 140L 1866
Motor with A16 pump end and if run with 12x 275w solar panels:
Heads L/min GPH
190m 28L 370
170m 40L 533
140m 43L 573
100m 67L 890
60m 80L 1066
50m 85L 1133
You have to get below items by yourself: ( package do not include)
1, A stainless steel wire ( called safety cable) to hold pump in bore. If pumping water from dam or river, a float set up required.
2, Steel frames to support solar panels. Solar Panel dimension: 1640 x 992 x 40 mm. weight: 19kg.
3, Poly pipe from pump to water tank. ( recommend 40mm or over diameter poly pipe.)
4, 3 wire power cable (2 wires plus earth). we recommend cable size at least 2.5mm. (We sell 2.5mm x 3 cost $4/m and 4mm x 3 $5/m).
Solar Pump Specifications:
- Brushless permanent magnet motor.
- Either DC/AC input motor, Built in MPPT controller with low power and low water protection
- Motor output power from 750w-2200w, Input voltage from 90V-360V/DC ( maximum open circuit voltage <440V) or 240V/AC
- Motor are water cooling without mechanical seal and bearing, It last longer.
- Motor and pump made by stainless steel 304
- A12 and A-16 pump outlet: 1.25"/32mm and BF09 and BF-11 pump outlet: 1.5"/40mm
- All solar panels join in serial and maximum up to 12 x 260W
This pump is suitable for 5" or large bore. It used for pumping water from rivers, dams, creeks and springs and to transfer water from one site to another.
Ti is easy to install, all plug and go. cost nothing to run after installation.
