Submersible bore pump package include:
0.5HP 240V/50Hz motor, Tuhorse TH-S-08/0.5HP pump and 0.5HP starter box. (Auto control box upgrade)
Voltage : Single Phase 240V/50Hz
Max Heads: 69M
Max Flow: 35L/min or 2100L/hrs
Pump Dimension: 723mm x 100mm
Power cable: 1.5M Cable
Warranty: 12 months return to base warranty in Australia
More technical details about motor and pumps:
This Tuhorse pump diameter is 4"/100mm. It si suitable for a 5" or large bore well. Designed for domestic clean water use. It is suited for shallow wells and not for large water flow varying from 5m deep to 60m heads. Maximum delivery: 2,100L/h water.
This is small power bore pump which can run a small generator.
Litres per minute Heads or Depth of Bore
5 lpm 69m
10 lpm 67m
15 lpm 64m
20 lpm 59m
25 lpm 53m
30 lpm 46m
35 lpm 10M-37m
This submersible bore pump is packaged with a starter box. The latter can be upgraded to auto control box with 6 water sensors to detect either bore or tank's water level +$85.00.
Please click the link to upgrade Auto control box
Power cable recommended;
Cable length from motor to control box Cable size
0 to 55m 4 wire x 1mm
55m-80m 4 wires x1.5mm
If you would like purchase submersible power cable from us, please go Accessories and Parts
3 Reviews Hide Reviews Show Reviews
Hard to write a review on something that will be in the ground (hopefully) for years. Reliability at this stage is unknown so just commenting on installation) Quality of the the supplied units seems good. The instructions are like something from 1990 with poor Chinese>English translation. In 2019 this is not acceptable as there are many very good English speaking Chinese. It appears that despite selling into English language markets nobody wants sit down for a day and get it right. This would make installation very confusing for a first timer. I am not surprised that people comment about the great support from the distributor. With good instructions this would not be needed. Some points to note. If you order the depth sensors they only come with 1.5 metres of wire attached so you need many meters of wire to extend these to the right depth for your bore. Soldering is not an option if you screw up a crimp as the wire from the pump does not take soldering. No guidance is given re crimping. A basic automotive crimper seems to work OK.
happy with quality
Installed it 4 months ago, 35m into bore. Been running ever since with not a hiccup. Excellent service from the supplier. Just make sure you get the splicing kit and don't attempt a cheaper alternative - it saves having to pull the pump up and fix the cable connections.